[GUIDE] Deodex your stock ROM {THEMING YOUR ROM}

IT is the first step towards Theming your stock rom...

DEODEX => A way of accessing the system files to allow use of custom themes, icons,   buttons, menus,phone dialpads, and more..

i.e.

                      In Android file system, applications come in packages with the extension .apk. These application packages, or APKs contain certain .odex files whose supposed function is to save space. These ‘odex’ files are actually collections of parts of an application that are optimized before booting. Doing so speeds up the boot process, as it preloads part of an application. On the other hand, it also makes hacking those applications difficult because a part of the coding has already been extracted to another location before execution.

             Deodexing is basically repackaging of these APKs in a certain way, such that they are reassembled into classes.dex files. By doing that, all pieces of an application package are put together back in one place, thus eliminating the worry of a modified APK conflicting with some separate odexed parts.

So, Deodexed ROMs (or APKs) have all their application packages put back together in one place, allowing for easy modification such as theming. Since no pieces of code are coming from any external location, custom ROMs or APKs are always deodexed to ensure integrity.

WHAT U WILL NEED :-

• ROOTED android device
• BUSYBOX INSTALLER (from market)     /*skip if already have*/
• XULTIMATE
• Android SDK toolkit

STEPS TO DEODEX YOUR ROM :-

1. Unzip xUltimate v2.2. Launch “Main.exe”.
2. Now xUltimate should recognize the phone and make a connection. You will now see a list of options.
3. Run option 1. After option 1 is done, run option 2.6. This may take a while, so be patient.
4. Now run option 3
5. After you have run option 3, you MUST navigate to the xUltimate folder and find “origi_frame” folder, and delete “guava.odex“. This file interferes with deodexing process.
6. Note: If there is no guava.odex, then simply continue to next step !
7. Now run option 4, and wait.
8. Exit xUltimate, and put the phone in USB mass storage then copy “done_frame”, and “done_app” to the root of the sdcard then put the phone in PC mode.
9. Open a command prompt, and do the following:

NOTE:- Goto folder where android sdk installed. Then goto platform-tools folder in it. Right click on free space in folder while pressing shift key.Select open command prompt here.
Now enter commands.

if you are using adb shell in su for the first time, keep phone screen on. After entering "su" code, super user request prompt in phone. Press allow

  

adb shell
su
stop
mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
busybox cp /sdcard/done_app/* /system/app/
busybox cp /sdcard/done_frame/* /system/framework/
rm /system/app/*.odex
rm /system/framework/*.odex
mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system
reboot

After the boot, reboot again in CWM and Wipe Dalvik Cache, reboot and ENJOY !!!

Notice : First boot will take a little bit longer than normal

NOW YOUR ROM IS READY FOR THEMES OF UR CHOICES.... !!!!!

Read More

[Starter Guide] BUILDING YOUR OWN CUSTOM ROM FROM STOCK ROMS DIRECT FROM DEVICE

These are the whole new step towards the development of android devices

                        i.e. BUILDING YOUR OWN CUSTOM ROM

It includes many features and depend totally upon ur choice of what u want and/or need to make ur device so called BETTER!!!

The basic features that ur rom contains generally:-

• THEMES (i.e. frameworks, launchers nd all sort of visuals)
• KERNALS (i.e. interface performance, efficiency of device)
• TWEAKS (i.e. device performance and efficiency)

So, we will cover above topics step by step resulting in OUR OWN CUSTOM ROM.

NOTE :- Building custom rom from stock rom direct from ur device MEANS MODIFYING the rom present in devices, it might need pc for modify some features

ND it is SLIGHTLY DIFERENT FROM EDITING CUSTOM ROMS ALREADY PRESENT FOR DEVICES!

Read More

[DIY] make your own WIFI SPYBOT

For making a wifi spybot the basic process involves stripping the R/C car, plugging in the Barracuda – which bridges the local servo controls with an ethernet connection – and hooking up the wireless router and webcam.  There’s also some fiddling with network settings to be done.

We will be showing you how to build a wifi robot / spybot from scratch. It is a very straight forward project and can easily be handled by a intermediate robot builder. To complete the robot, it will take a couple of hours.

WHAT U NEED FIRST-

1-Rc Car (new or used, choose one that could easily have a Rc servo fitted in the steering system. We got ours from Radio Shack.)

• 1-Barracuda wifi robot controller
• 1-Wifi Router 
• 1-Network Camera
• 2-Ethernet Cables
• 1-5v Regulator for camera
• 2-3 7.2v Rc Batteries (3300mAh or greater recommended)
• Misc wire, solder, tape etc.

NOW follow some steps :-

Step 1: Hacking The Car

To start building your wifi Robot / spybot, gutting of the Rc car is the first step. Take out everything! We got our Rc truck from Radio Shack, but others will work also. We gutted it out and built a roll cage on top. Here is a Picture of the truck gutted and the 3 Rc batteries mounted in the truck.

The two red batteries are to power the main motor and the barracuda wifi controller. While the blue 7.2v battery will power the Linksys router, 5v Regulator for the camera, and the steering servo. Three batteries are not needed, but i just find that it makes the wifi robot / spybot more reliable and allows longer run times. If you opt for two batteries the Linksys router can handle 40v, so you will be fine running it straight off of the two packs. The same with the 5v regulator. Te only problem will be the power for the steering servo, so you will either have to add another 5v regulator and run it off of that or just get a higher amperage 5v Regulator and run the servo and the camera off of it. The latter would be easiest. 

Step 2: Install The Steering Servo

We gutted out the steering box and retro fitted in a standard Rc servo. Other people have used the steering Mechanism that comes with the Rc car, But I wanted true proportional steering.

Step 3: Install The Barracuda wifi robot / spybot controller

(Picture One)
We started this step out by extending the leads coming from the motor by soldering on extra wire we had laying around.

(Picture Two)
Here is a picture of the barracuda wifi robot / spybot controller. This is what we will be using to control our robot.

(Picture Three)
Here is a picture of the yellow lead from the motor connected to the terminal block. You can also see how the batteries are connected in series to power the barracuda wifi robot controller. On the green terminal block is where we connect the servo. The red wire is connected to the third 7.2v batteries ground and the servo's ground. The white wire is the servo's signal wire. The barracuda has two output ports. Each can individually be configured as a digital or analog input, digital output, or an Rc output making the Barracuda very flexible

 Step 4: Power the camera, router and servo

In this step, all we did was take the mating connector that will connect to the batteries connector and solder the power and ground together for the 5v regulator. The power plug for the Linksys and the power wires for the servo. For a more detailed view, check out our Youtube Video.
Here is a picture of the 5v Regulator attached to the rear battery.

 Step 5: connect everything to the router

 Configure your router to have the base Ip Address of 192.168.1.1. The stock Ip Address for the barracuda is 192.168.1.10. The IP can be changed to whatever you want it to be with the configuration program that comes with it. Connect the camera and the Barracuda wifi robot controller to the router using the two Ethernet cables. Configure the camera to have an ip that works with that of the router and barracuda.

Step 6: Power up and go!

The barracuda wifi robot controller comes with a sample program and source code to drive the car. Power the car up,connect to your camera in the browser, run the sample program for the barracuda and start driving! The barracuda also supports use of a PS3 controller plugged into your computer to control it.

SOURCE - instructables

Read More